Commercial · Mobile, AL
Protect storefronts, doors, and equipment with properly installed bollard posts that take real impacts and stay plumb. Frontier Fences Mobile has served Mobile since 2018, handling new bollard post installation plus repairs for bent, loose, or rusted posts around parking and loading areas.
A durable bollard starts with correct layout and a solid base. We verify clearances and utility conflicts, mark post locations, and excavate to the required diameter and depth for the site, then build a stable footing with compacted base material where needed. For new installs we set steel pipe bollards (often 4-6 inch schedule 40) in concrete, brace for plumb, and finish the top with a welded cap or dome to keep water out. For replacements, we core drill and remove failed concrete, then reset the post to correct elevation and spacing so it protects what it is supposed to protect.
Along the Gulf Coast, moisture, salt air, and heavy rain can shorten the life of exposed steel, so finish work matters. We offer primer plus industrial enamel, powder-coated sleeves, or stainless options depending on the risk and the look you need, and we can add reflective bands or high-visibility yellow safety coatings for night parking lots. Where customers need removable access, we install lockable removable bollards with receiver sleeves set in concrete and proper drainage. We also repair leaning or damaged bollard posts by cutting out compromised sections, rewelding caps, treating corrosion, and restoring the concrete collar or curb edge for a clean, trip-safe finish.
Mobile-area customers choose us because we treat bollard posts as safety infrastructure, not just metal in the ground. You get straightforward communication, a written scope, and crews equipped for accurate excavation, core drilling, and concrete placement, including proper bracing and curing time before opening to traffic. We work around business hours when possible and keep pedestrian routes and entrances usable with cones, caution tape, and staged work zones. If you are also dealing with fencing, gates, or perimeter control, we can coordinate the bollards with your fence line and access points so the whole site works together.
After installation or repair, we do a walkthrough to confirm spacing, height, alignment, and the protected area, and we review any required curing window before vehicle contact. You receive a clear written estimate up front, material specs on the bollard type used, and a clean jobsite with concrete washout handled responsibly. For commercial properties, we can document locations and quantities for maintenance records and future replacements. When you need bollard posts that look professional and hold up to real use, we focus on the base, the welds, and the finish so you are not redoing the same problem next season.
Yes. We provide a free written estimate after an on-site measure so pricing matches your layout, gate needs, and fence height.
Yes. Frontier Fences Mobile is licensed and insured for fence installation and repair work.
Yes. We can remove and haul off old wood or chain-link fencing and then install the new system, including post removal when feasible.
We build and install walk and driveway gates sized to your opening, using job-appropriate hinges, latches, and drop rods. Tell us the clear opening you need and how the gate will be used.
Yes. We repair leaning sections, damaged pickets, loose rails, rusted chain-link components, and sagging gates, and we can replace posts and hardware where needed.
Bollard posts are one of the simplest ways to prevent vehicle strikes, protect pedestrians, and guard storefront assets like glass doors, roll-up bays, equipment pads, and fuel or utility areas. The difference between a bollard that holds and one that fails is almost always the footing, the steel spec, and the finish. Frontier Fences Mobile installs and repairs fixed and removable bollard posts for commercial sites, multifamily properties, and homeowners who need reliable impact protection.
For new bollard posts, we start with layout, clearance checks, and excavation sized to the job, then set the post plumb and brace it during concrete placement. Common commercial installs use 4-6 inch steel pipe, with the post embedded in concrete deep enough to resist impact and soil movement. If you need traffic-rated protection at entrances or around equipment, we will discuss spacing, height, and whether a sleeve, cap, or filled pipe makes sense for your site use.
For repairs, we handle leaning bollards, cracked concrete collars, corrosion at grade, and bent posts from parking lot bumps. Typical fixes include removing the damaged section, restoring the footing, resetting the post, rewelding caps, and recoating to match existing posts. If drainage is causing rust at the base, we can adjust the finish and detailing so water does not sit against the steel.
Every project finishes with a quick quality check and a practical handoff. We confirm the posts are straight, the concrete is smooth and trip-safe, and any removable units lock and release properly. If you need bollard posts in Mobile for protection, compliance, or property safety, request a free written estimate and get a plan that fits your site and traffic flow.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Mobile. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
